1992 Chevrolet S-10 "brake light wiring signal" Questions

Ad

Question about Chevrolet S 10

2 Answers

...brake light switch? ground to the brake light assembly? were the sockets melted at all? sometimes they will deform from heat- you can usually pry the contacts out a bit to make contact with the light ...

Ad

Question about Chevrolet S 10

1 Answer

...brake light wire from the pedal... anyone know wich of the 6 wires is kneeded? 2 of them have constant power starting at the tail light harness coming from the truck, brown wire is for tail lights, ...

Ad

...brake light bulbs? It is more common to have burnt bulbs than a bad brake light switch or blown fuse. Do you have orange signal lights and red brake lights at the rear? Then the signal light switch ...

...brake light wire, after the brake light switch, is routed through the turn signal switch, before it is sent to the rear lights. With a test light or a voltmeter, you could follow the power from the ...

...brake light doesn't work. both tail lights work, but the turn signals don't work. I have replaced the bulbs Brake light & turn are on same wire, try cleaning socket & contacts well and retry. ...

...brake light wiring goes from the switch, through the turn signal switch, then to the brake lights. This is done so that when the turn signal is on and the brake light is on at the same time, the bulb ...

...signal lights are still flashing fast. I have replaced the rear passanger-side bulb, but it did no good. I'll check the fuse box to see if everything is OK there. Thanks, Will Recheck your wire ...

...wiring harness and connections for the brake lamp circuit. Sorry I can only generalize at this point. You will likely need a wiring diagram in order to understand the layout of the circuit, so that ...

Question about Chevrolet S 10

1 Answer

...Brake light works off the yellow wire for the left and a green wire for the right. The drive lights (tail lights) operate off of the brown wire. They use a double element bulb. Hope this helps. Also ...

Question about Chevrolet S 10

1 Answer

...not on no signals rear front signals work till you turn on the lights and there is no rear signals brake lights or running lights there is good grounds to body and engine flashers and signals in

Not finding what you are looking for?
1992 Chevrolet S-10 Logo

584 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...