1998 Buick Skylark "ignition" Questions

How do I put in an ignition coil for plug number 1? IF YOU HAVE THE 2.4L ENGINE.YOU HAVE TO REMOVE TOP IGNITION COIL COVER ON TOP OF THE ENGINE CYLINDER HEAD.YOU HAVE 4 SCREWS HOLDING THE TOP IGNITION

1998 pontiac gtp key will not come out of ignition Did a search and found a temporary solutionTry."- remove bottom plastic cover from steering column.- installed a small hose clamp around the ignition

...I accelerate , runs rough sometimes I have replace the spark plugs , spark plug boots, and both ignition coils , had the ignition control module checked it is good. what else could it be, or are ...

the ignition key will not turn in our 1994 buick the ignition key will not turn in our 1994 Buick skylark. we have tried two different keys and the ignition switch will not budge. try pulling the ...

...belt, fuel pump, engine computer, EVERYTHING, has been replaced. HELP!!! check for power to ignition module--pink wire. Use a 12 volt test light. Bad fuel injectors, or fuel pump or fuel pick ...

buick ignition cylinder stuck The key goes easily in and out of the ignition cylinder but it will not move forwards or reverse. I've done everything but call the locksmith and have the cylinder looked

...Buick skylark. 4 cyl engine. Mechanic worked on car because she would not turn over. He replaced ignition coil and did a complete tune up. Same problem, he again replaced ignition coil. She

Got a new tach ,my car doesn't have one, how do I hook it up to a '90 buick 3.3 with electronic ignition? The "instructions" only show how to hook up to standard ignition. Hello! Your ...

...now not turning, however, the key not turning properly could have caused the dead battery if the ignition switch did not turn off all the way. Anyway, if the key won't turn, you most likely need

Started car, went to turn it off and key won't turn off or come out. I pulled the ignition fuse to get it to turn off. Before pulling fuse, much of the electrical system wouldn't work either. If I put