1986 Buick LeSabre "starter whining noise" Questions

...STARTER NOISE DIAGNOSTIC PROCEDURE STARTER NOISE DURING CRANKING: REMOVE 1 - 0.O15" DOUBLE SHIM OR ADD SINGLE 0.015" SHIM TO OUTER BOLT ONLY. HIGH PITCHED WHINE AFTER ENGINE FIRES: ADD 0.015" DOUBLE ...

...noise ceases. Disconnect battery ground cable and raise and support vehicle. Remove starter braces, shields or other components that may hinder starter removal. Support starter and remove mounting ...

...starter pinion. A whining noise during cranking indicates the starter pinion and ring gear is not meshing correctly, possibly because the starter retaining bolts have worked loose. A whining noise ...

whining noise, the starter is not engaging the flywheel. If the engine is turning over with the starter engaged, the engine has most likely jumped time that creates low or no compression which results

...to start it and it just makes a whining noise and no start does engine turn over? sounds like maybe starter bendix problem. if starter whines but engine doe`s turn over replace starter good

...galant 3.8 v6 won't turn over at all. Just makes a whining noise. Battery works lights come on. Just makes a whining noise and no turn over at all. Sounds like your starter is junk replace ...

Chrysler town and country starter will not start instead gives a loud whining noise Car won't start instead gives whining noise Replace starter and/or solenoid.

...starter going bad and possible power steering leak Sounds like a transmission problem. Check the transmission oil level. That sometimes causes a whining sound. Hope this helps. or the alternator is ...

whining noise indicates that you have a starter problem. The starter is spinning but the bendix is not engaging the flywheel to turn the engine. The starter will need to be rebuilt or replaced. Hi and

...starter makes whining noise and the car woudn't turn over sounds as if your starter isn't engaging,usually due to either the solenoid not operating the bendix or  a bendix fault, to ...