1986 Buick LeSabre "jeep start camshaft sensor grounded" Questions

Ad

jeep won't start until a clicking sound comes from fuse box i have no fuel pressure no spark until a clicking sound comes from the fuse box under the hood which starts fuel pump running fuel pump ...

Ad

...Jeep Cherokee. What might the problem be? DTC P0340 - Camshaft Position Sensor Circuit Malfunction Symptoms can include: Hard starting or no start Rough running / misfiring Loss of engine ...

Ad

Question about Buick LeSabre

2 Answers

...start occasionally then engine light comes on and thats the code that shows tht is a camshaft sensor code. you probablyhave a sensor just starting to go bad and when it does the truck won't start no ...

Question about Buick LeSabre

2 Answers

...start This means NO CAM SIGNAL AT (PCM) Possible Causes= Camshaft Position Sensor (most likley) MP signal circuit shorted to voltage Tone wheel/pulse ring damaged Sensor ground circuit open 5 volt ...

Jeep Grand Cherokee Laredo 4.8l V8 Camshaft Position Sensor Replacement. How can I tell if mine had a spacer on the mounting bolt. I keep getting light scratches on the face of the sensor and no start

jeep will just die going down doad or will not start, had a code that read camchaft sensor replaced that still the same, now i have a code that reads injector circuit malfunction i mhave changed fuel ...

Jeep so I don't know what they use for a sensor wheel. Take the sensor out and turn engine by hand while looking in the hole where the sensor goes and try to see if the sensor wheel is going around. I

Question about Buick LeSabre

1 Answer

jeep last nigh had no problem this morning turns over but won't start. Used my code reader and got p0340 cam shaft sensor, replaced that and still having same problem DTC P0340 - Camshaft Position

Question about Buick LeSabre

1 Answer

...start at alll.... so i amaturly tested some wiring to the distributor and there was some current not sure if i did this correctly i am terrible with the electrical side of the cars. i neeeed help!! ...

start after replacing crankshaft sensor, camshaft sensor and MAF I have replaced the crankshaft sensor, camshaft sensor, and MAF after the car died on the freeway and was towed to a garage. Garage ran

Not finding what you are looking for?
Cars & Trucks Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

1998 Buick LeSabre
1998 Buick LeSabre

897 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...