2004 Oldsmobile Alero "oil light beep turns car" Questions

...light . Turn ignition key to the on position (with engine off). Depress accelerator pedal 3 times. Oil change light should blink and you should here a beep, light will go out. Turn ignition key

oil light remains on after oil change and light over license plate does not work after bulb change To reset the Change Oil Light: Open driver's door and open fuse access panel Turn ignition key to on

...oil change light in a 2003 olds alero turn key on (dont start engine) floor gas pedal 3 times 1,2,3. turn key off, now start engine it should go off, if not try it again. Should be listed in your ...

oil light in my 99 olds alero open your fuse panel, and hold down the "reset" key or turn your key to on, push the pedal three times, and on the third time hold, should hear a series of beeps, and the

...light is on , i changed the oil and cheched air pressure . tried to reset but light stayes on Open the driver door on the car and locate the fuse panel on the SIDE of the dash. Remove panel and there ...

...oil" light? Try this procedure; Locate the "Red" reset button towards the top of the fuse panel, in the fuse panel on the side of the driver side dash. (Open driver side door and remove the fuse ...

...oil light in the fuse box of my 2001 Oldsmobile Alero If you are using a hand-held diagnostic or obd2 then yes it should be running. no to reset it only have the key on acc,push the reset in and hold ...

...oil dash light, can you help?? Try disconnecting the battery If it is the same as the 2001 Alero, open the fuse panel on driver side. Turn key in the ignition to ON. Hold Tire/Oil reset button in ...

...oil light I just change my oil in my 2000 alero and I can not get the change oil light to go off? After you change your oil you must reset your system to start tracking your next oil change. Simply ...