1989 Oldsmobile Cutlass Ciera "timing chain 89" Questions

...timing had jumped sputtering but not quite starting. Then it'd just tu I checked the diagnostics and just got 12 12 12 which I believe means the diagnostics are functioning. there's about ...

...Timing Chain, Sprockets, and/or Tensioner Replacement -------------------------------------------------------------------------- Tighten the chain guide bolts to 10 N·m (89 lb in). Tighten the chain ...

...timing chain tensioner and backing plate Primary timing chain VVT unit, exhaust camshaft sprocket and secondary timing chain Secondary timing chain tensioner Secondary timing chain guide INSTALL BANK ...

Timing chain setting for 89 Firebird Can anyone tell me how to set the timing chain for an 89 Firebird? Yes, there are two timing marks, one on the crank gear, and one on the cam gear. The crank gear ...

timing chain on a 2002 Saturn L series 2.2 liter along with the allignment marks for the intake and exhaust cams To Install: Install or connect the following: Timing chain drive sprocket to crankshaft

...timing chain..Take the belt of and turn the crank by hand and see how much slop there is when you turn it back and forth..If theres not much then there could be a cam problem.But most of the time its ...

that misses and backfire thru the intake Like I said above--our 89 Buick 3.8 misses and backfires thru the intake. What is causing this problem? HAVE TIMING CHECKED.  Timing chain may have jumped

...for my 1989 gmc c1500 5.7 I time these engines at 4 to 6 degrees BTDC. If there is timing chain wear or if it has higher mileage, I go to 8 BTDC. The extra degrees help with the timing chain

gmc lost power and egine light came on now it 89 gmc lost power and egine light came on now it wont start i replaced fuel filter Possible timing chain, but...see if you still have spark and fuel first

...on. My friend said it might be the timing chain that went out because most likely it hasn't been changed yet. Is my friend right? If so where can I get the timing chain diagram? timing belt not a ...