1989 Oldsmobile Cutlass Ciera "cam" Questions

...even try to start if I mist starting fluid into intake. Seems like from what I've read maybe cam sensor or crank sensor, but then why would it still have spark on all cylinders? And, can't

i have a 1992 cutless with a 3300 engine it was running last night when i came out this morning it would not start. first thing that i check was it getting fuel, yes i took off one of the wires going ...

timing gear removal from cam on 1988 olds. 2.5L engine There is a special puller that your are going to have to locate at a dealership or from Kentmoore tools which is a company that supplies special ...

where is the cam sensor located on a 1994 olds cutlass cerias with a 3.1 liter , remove and install directions are remove serpentine belt , remove power steering pump assembly , then remove sensor ...

warped cylinder head on 1994 Olds Cutlass Ciera... Options? With heads that have a cam in them resurfacing is a non-option. If you resurface the head it's still bent and the cam(s) are binding in ...

...from the junkyard? I just dont know. Ignition control module tested good also. Have you checked the Cam sensor? The Cam sensor controls the injector pulse. probrably injectors not firing ...

...and backfiring when it dies it wont restart for hours. just replaced fuel pump I would check the cam sensor,and it is most likely the crankshaft sensor,that is the

Car stopped. Now won't start If it cranks but won't start the likely culprits are cam or crank position sensor, or the igntion module. You can remove the ignition module and have it tested at most ...

cam need a pic of motor to see the cam shaft My manual states the 1993 Oldsmobile Cutlass Ciera had either the 2.2 Liter, Sequential Fuel Injection, Overhead Valve engine, or the 3.3 Liter Fuel ...

...have already replaced the most common components that can cause a no spark condition I suspect a cam sensor error or crank and cam sensor going out of range with eachother. This may or may not ...