1986 Oldsmobile Cutlass Supreme "seat belt wont buckle" Questions

Seat belt on driver's side wont pull out. Im a normal size person. Belt just wont retract and pull out far enough to buckle Try pulling on it VERY SLOWLY if that don't work then you need a new

seat belt noise wont stop even went i have the seat belt on On most any car, the best way to stop buckle noise, plus add instant easy, stuck in car after accident release, for only $20 is below: http:

seat belt I got trap in my seat belt yesterday I had to crawl out of it what can I do? if it wont undo from the buckle you will have to unbolt the belt at its anchor points and take to a garage to see

...seat belt broken is it a repair I can make driver seat belt is broken. Is it a repair I can make the buckle wont click into place. Try and see if anything feel into the buckle and posibly it needs to ...

...seat belt light wont turn off when unbuckled happens off and on Question moved from Spanish car company Seat category (pronounced See-At). There is an electrical contact in the buckle assembly. Spray ...

...seat belt end back and forth with force. Did the belt move at all? Did you remove the rear seat bottom cusion from the car? That will give you additional leverage on the belt. If the belt twisted the ...

...seat belt assembly? is your problem with the seat belt buckling to the locking metal piece or is it the fact that when you pull on the actual seat belt you notice that it is tight and wont budge at ...

seat belt buckle will not lock it is because of something down it side of it spray some wd 40 into buckle if this does not work a new buckle is needed. replacement is easy the hardest part is removing

seat belt receiver the buckle inserts into the middle buckle but it wont latch into place and the release button just sits in the pressed position and what i want to know is if this is something i can

seat belt locked in place The seat belt buckle is locked into the receiver and wont unlatch. Any suggestions? Thanx. There is a recall on this problem, so best thing to do is go to the GM dealer and ...