1986 Oldsmobile Cutlass Supreme "replace brake line" Questions

replace rear passenger brake line on 1993 cutlass oldsmobile, line rusted in the middle of the car frame and blew a leak. If you want to do this yourself, just remove the brakeline. Go to a parts ...

brake line leak, didnt properly blead the lines or the master cylinder is bad. Have you bleed the brakes Have you checked the fluid level in the master cylinder Inspect the lines to make sure they are

...brake fluid this will take any air out of the line .... start at the back brakes and make you way to the front .....but you have to keep replacing your brake fuild in the master cylinder to full or ...

free online chilton manual having brake issues, replaced rear brakes and calipers, bleed, drove for a week brakes went out. now cant bleed rear brakes, no fluid will come out, have tried using vaccum ...

...brake lines on a 94 Old Cutlass? I need to replace the right rear on a friends vehicle and want to get the parts on way to get it done. Also, what size flare nut is used? Thanks for your help. Hello ...

We replaced the front and rear brakes and now when I press on the brake peddle it goes all the way to the floor. I've pumped them and still goes to the floor. I checked the fluid and it is ok what

rear brake cylender replacement rear brake cylender leaking i replaced it but when i tried to bleed i cannot get any fluid out of either rear cylender would power bleeding fix the problem have you ...

...replace flashers....i dont know what else it could be....please help!!!! the brake light switch is located in top part of the brake pedal and it controls all brake ligts the top and bottom lights use ...

I replaced the master cylinder, and still have no brakes. The pedal went to the floor when pushed slowly, but when stomped on, it would give resistance; a tell-tale sign of needing the master cylinder

...line tubing. Loosen the bleeder and leave a box wrench on bleeder. Warm up the plastic tube in hot water and force it over bleeder end. place the other end in a glass jar with the end of the tube in ...