1984 Oldsmobile Cutlass "starter motor" Questions

Ad

Question about Oldsmobile Cutlass

1 Answer

...starter should work, if it does, turn the motor off, and try again and see if it works if it does your ok, if not then try the above again, if you have to do it every time you turn the motor off then ...

Ad

..., failure of contact if there is even the clicking noise. 3.Starter motor brush/commutator is worn out and not contacting. 4.Finally the starter pinion is struck, not engaging with fly wheel

Ad

motor lost track of distribitor wire can i go from starter to distribitor also no return line for fuel pump can i plug it the power to the dist needs to be switched, so no you cant go to the starter..

...back on,and one more time,a total of 30 minutes,this should do it,if this is the problem. check the cables connecting the starter motor and battery cables connecting wing and you may have a loose ...

Question about Oldsmobile Cutlass

1 Answer

starter motor. The starter motor is serviced only as a complete unit. Disconnect the battery ground (negative) cable from the battery. Raise and suitably support the vehicle. Refer to Vehicle Lifting.

...starter motor. The starter motor is serviced only as a complete unit. Disconnect the battery ground (negative) cable from the battery. Refer to Battery Negative Cable Disconnection and Connection. ...

Question about Oldsmobile Cutlass

1 Answer

...starter motor must not be energized for longer than 5 seconds, otherwise you run the risk of burning out the starter motor coil. Remove the starter motor from the vehicle. Detach the field coil lead ...

...starter motor and solenoid on 1994 nissan bluebird? Locating and removing or testing the starter motor and solenoid on a 1994 Nissan Bluebird can be done by following these steps: Locate the starter ...

Question about Oldsmobile Cutlass

1 Answer

starter motor unit, matchmark the solenoid-to-starter motor housing position, as shown in the accompanying illustration. Remove the starter motor from the vehicle. Detach the solenoid-to-starter motor

Question about Oldsmobile Cutlass

1 Answer

...starter motor terminal. Remove the starter motor-to-transaxle bellhousing mounting bolts. Remove the starter from the vehicle. If equipped, remove the starter motor spacer. To install: If equipped, ...

Not finding what you are looking for?
Cars & Trucks Logo

126 questions posted

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...