1983 Oldsmobile Cutlass Supreme "turn signal switch" Questions

...turn signal is used. Right brake light goes out when left turn signal is activated. ABS light comes on when left turn signal is activated twice. this is a 1995 Olds Ctlas supreme my oldsmobile 1995 ...

...TURN SIGNAL ONLY, Will not flash. When using the turn signal switch the lite stays on, I have to use it manually. ** 4-Way flashers works o.k. ** Replaced flasher under dash. ** Checked fuses and ...

...turn signal switch no brake lights no turn signals and brake light warning lights on turn signals won't work hazard lights won't work and the brake lights won't work need to replace the whole ...

turn signal. but if i dont use my true signal my brakes work,so i have to drive without using my turn signals the switch in the steering column is broken. you will need to replace it. the contacts are

...turn signal switch on a 1996 oldsmobile cutlass supreme? To exact step by step procedure to replace turn signal switch on your car.lease click on the following link mentioned below:--- ...

...turn signal lever up and down slightly to see if your brake lights work this would tell me that you have a faulty turn signal switch because GM runs the brake lights thru the turn signal switch so ...

...turn signals to stop working. I'll bet my 2 cents that's where your problem is. Good luck mate! I had same problem we changed the turn signal switch inside the steering wheel and all lights work

...turn signal. Any idea how to fix this problem? Sounds like you need a new turn signal switch. The lower brake lights are wired through the turn switch. When you fiddle with the turn lever with brake ...

turn signal switch on a 92 Cutlass Supreme S? Well two major tools you will need,a steering wheel puller ,and a lock plate remover.Remove the horn button(carefully disconnect the horn button wire) pad

...Turn signal switch -> Rear lights. The only difference is, if you have a 3rd brake light in your rear window, that gets its power directly from the brake switch. It does not go thru the signal ...