cam 2.4 ltr engine Is there a a way to check the codes with just the iginition key on this model by chance? I would appreciate any info :) Thanks in advance :) The car's computer must be scanned. Some
1999 Volvo S80 2.8 Turbo Timing Over advanced I am wondering if it is possible to manually correct an over advanced cam on a Volvo S80. I have done work on it before I know that the Cam position ...
...timing BELT and tensioner, that time the cams relative to the crank? P0011 means the timing is over-advanced (if you were doing timing belt/chain work, it's probably not on correctly and one of the ...
Question about Mini Cars & Trucks
...cam sensor and timing code keep come back on saying timing to far advance car keep advancing out of timing on start up possibly not the sensor but the hydraulic adjuster that controls the cam timing ...
...cam, advance it untiol the engine pings lightly, then back the timing of 2-3 degrees's hi with a timing light at about 650 rpm its 5 degrees btdc depending on what cam u can go up to bout 10 degrees ...
cam will over advance and hit a piston. Time the exhaust cam and put in your tensioner( I always reset the tensioner by knocking out the insert and starting it at the first detent( replace if possible
Question about Oldsmobile 88
...advance .Look at the cam and crank pisition sensors More then likely the crank pisition sensor or your timing is severely out or very worn distributor internals being a 94 it won't have cam or crank ...
Question about Cars & Trucks
...based on the tone ring on the cam. Advance/retard is accomplished by the ECM based on other engine parameters (temperature, rpm, throttle position, etc). The sensor should only install one
...ask for help, (best is to ask before) hard to crank, if battery is NOT weak means the spark is too advanced. that means on unsaid engine 05, that the cam is too far advanced. the crank sensor will ...
...Cam Timing Advance is excessive Check your cam positioning sensor and see if that could be your culprit It Is A Timing Problem Says ****** setting Incorrect .Witch Could Mean It has Jumped Time , Too ...
390 questions posted
Usually answered in minutes!
14 Questions
256 Questions
219 Questions
204 Questions
185 Questions