Serpentine belt diagram for 1994 Oldsmobile 88 3.8 ls Here's a Autozone repair guide on your belt. Repair Guides Routine Maintenance And Tune up Belts AutoZone com Here's another link to your belt ...
How to replace a fan belt. Loosen the alternator and remove the belt. After you put on the new belt pull back on the alternator until the belt is tight and tighten the belt tension.
the timing belt just came off of my car last night on my 1994 oldsmobile 88 and i cant figure out how to put it back on need some help maybe send a diagram step by step would help The 1994 Oldsmobile ...
how to replace serpentine belt v-6 Fairly simple. You have to take the tension off the tensioner pulley to get the belt off, then release it when you put the new belt on. You may need a serpentine ...
need daigram for delta 88 3.8 serpantine belt. need daigram for 1995 delta 88 3.8 series 2 serpantine belt. Thanks if the old belt is still on, its quicker if you just trace how the belt goes around ...
changed alternator, cant get belt on, pulley wont move? i chnaged the alternator and now the cant get the pulley on my 1992 olds 88 royale to move. so with the pulley not moving it impossible to get ...
...lot. Can I drive it again before getting it looked at, if it starts? very much sounds like a belt ,and that was the alternator light whether the same beltdrives them both or it was stalled
replace serpentine belt in 1997 oldsmobile 88 Decompress tensioner, slide belt off of idler pulley, Using schematic under hood reinstall belt, again decompress tensioner and slide belt over it
95 olds 88 3.8k eng remove and replace drive belt you will need a ratchet wrench or box end wrench with a 5/8" size socket or wrench to hold pressure on the tensioner to remove tension off the ...
320 questions posted
Usually answered in minutes!
14 Questions
256 Questions
248 Questions
204 Questions
185 Questions