1996 Oldsmobile 88 "water pump series 2" Questions

Ad

...water pump I have the 3800 series 2 V6 engine the pulley needs to be removed to remove the PS pump, this pulley is pressed onto a tapered shaft (they used a bolt around 35 years ago), it requires a ...

Ad

Water pump -- A bad shaft seal will allow coolant to dribble out of the vent hole just under the water pump pulley shaft. If the water pump is a two-piece unit with a backing plate, the gasket between

Ad

Question about Oldsmobile 88

2 Answers

...water pump cost for a 1992 audi s100 Go to carhelpsite.com it is free as long as you click on 2 of the ads at the website then your questions will be answered by an ASE certified mechanic,you don't ...

Question about Oldsmobile 88

1 Answer

...water pump to the cylinder head on many "A" series engines. A common point of failure. Always keep a spare. 1 hose and 2 clamps included. Not for 1275's Bypass Hose that goes from the water pump to ...

1995 bmw 318is series water pump the seal on the water pump is hard to remove Download PDF search | PDFTown.com RealOEM.com Diagram Selection Try those 2 sites - Good luck

BUT IT STILL WHINES AND IS STIFF STEERING DIDNT USE LAND ROVER PART WHAT CAN WE DO NEXT REPLACING THE POWER STEERING PUMP 2 TIMES WITH AFTER MARKET PART. Are you sure the problem is not the water pump

water pump? 2) What are the warning signs of a blown head gasket? 3) What are the warning signs of bad timing? Timing - engine is not sounding right or back firing. Head gasket - water and oil mixing,

...water pump from bmw 318 1995. I have all the bolts off and it still won't come off Tap it lightly with a soft faced mallet to break the seal that it shares with the engine. If this doesn't work, use ...

water pump and the leak is water and not oil. If it is water you need to replace the water pump and its seal, if not, the engine will require much more detailed tear down. Get yourself a Haynes repair

Question about Oldsmobile 88

1 Answer

...water pump. The water pump is a big assembly and is also the support bracket for the alternator. This is a pretty hard job to do and i suggest u have it done in a garage because the 2 top blots ...

Not finding what you are looking for?
Cars & Trucks Logo

248 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...