1996 Oldsmobile 88 "drive truck without map sensor" Questions

Drive (D without the box around it) and you should feel the bump of the torque converter unlocking. Then put it back into the upper drive location and you will feel it lock up agian. Repeat this about

...Drive, 350 Truck We have replaced everything but the knock sensors and the chip that goes to the computer and we are still having the same problem. The problem is that the truck will not idle ...

...drive it with the map unplugged for 14 hours without ruining anything. Don't have the money to take it to a garage. Hi, you do can run this as long as you want but keep in mind that fuel consumption ...

without a MAP sensor. While driving SES light comes on engine begins chug than stalls out. Pop in netruel turn key engine starts back up, idles fine for a short while then repeats. Only feathering the

...drive it 30 miles without much of a problem, when I replaced the vacuum lines it worked for 10 miles). The lag seems to happen right away, and the stalling seems to happen when it is warmed up a bit. ...

...drive. Doesn't sputter or hesitate just dies. Stays running in reverse, but not smoothly. on some automatics it can be a map sensor fault of a MAF sensor fault. you would really need the codes to be ...

...MAP sensor Issues. First inspect the vacuum hose for cracks or breaks, I suggest replacing it anyway because the car will barely run without it. If the vacuum hose does not help, make sure the sensor ...

...drive around without reseting the computer might figure it out after 30 miles. Check Engine light came on and the code was that I needed to replace the mass air flow sensor, I replaced the part but ...

...running, surges when in park it idles fine without hesitation. once in gear, drive or reverse it starts to surge and wants to stall out. Get the fuel mapping sensor looked at. what type of car is

code P0108 map sensor can i still drive it without making things worse try to reset maybe wont be back.