1991 Oldsmobile 88 "fix loose steering wheel 4" Questions

loose and allow the wheel to feel like it floats. It is a hard job, the steering column has to be almost removed from the car to fix. Removing the steering wheel and all covers down to the floor board

...loose where the joint is cant figure out how to get at it to fix I had a 1992 chevy van There are 3 or 4 small bolts way down in the steering column you have to remove the steering wheel and blinker ...

...loose when parked. one can wiggle it about 6 cm back to front. Hi my name is Brandon I am mechanical n electrical engineering technician and 4 generation mechanic its a blessing by God! But tell you ...

...loose on 97 sunfire. How can i fix it? You can move it up and down but still loose in lock position You have a tilt steering wheel! This is a problem with most GM tilt wheels. There is 3 or 4 screws ...

...fix manual steering play? Is the play in the steering wheel or in the actual suspension? If the looseness is in the wheel i would recommend changing out the steering gear. if the play is found in the ...

...loose steering box from frame, congealed fix a flat in one of the tires, worn out or broken shocks, loose wheel bearings, problem could be in the rear tires and felt through the seat. if shimmy is ...

...loose and cause the steering wheel to move a little bit. I fixed that problem, but now I'm stuck. I believe there is something that is supposed to attached the shift tube to the gear bowl or the ...

...fix it right. I am restoring it. Any help would be much appreciated You need to check all of you front steering components have someone turn the steering wheel back and forth. While you lay on the ...

loose. What can I do to fix it? your steering column has a plate with 4 inverted torx fasteners I believe they are e8 fasteners, you must remove the upper tilt flange to gain access to these bolts , a

...fix this. Can anyone help? Your upper column bowl bolts most likley are coming loose,Remove the steering wheel,the turn signal switch,and the lock plate and access the 3 bolts that take a #30 torx ...