...cable Engine from the vehicle Oil pan Engine front cover Cylinder heads Lock the jackshaft tensioner by installing a pin. Jackshaft sprocket and chain assembly Left front cassette ...
Question about Oldsmobile Delta 88
What is torque setting for front timing chain jackshaft bolt? 33 lb/ft + 90 degrees.
Question about Cars & Trucks
...someone tell me if only one nut is removable or can both be removed this may be of help: RX RS Apex Jackshaft Bearing Removal and Replacement ...
In the process of replacing the timing chains, tensioners and guides. Should the jackshaft have any fore and aft play? Yes, but be careful, the amount of play is critical and needs to be measured ...
...balance shaft chain + 1 back) 2 cam guides (1 front + 1 back) 2 oil tensioners (1 front + 1 back) 1 jackshaft tensioner (1 front) 1 jackshaft guide/cassette (1 front) 1 balance shaft tensioner (1 ...
Question about Ford Cars & Trucks
2001 ford 4.0l sohc engine , the rear jackshaft bolt should be torqued to 15 ft lbs plus 90% addional turn. the new bolt will not turn the addional 90% WHAT IS THE PROBLEM ? easy wrong bolt. or dirt ...
...to me that a V6 would need 2 cam shafts, one in each head. And I believe the Explorer also have a jackshaft running down the middle of the engine. I think there is a chain in front for one side,
Question about Oldsmobile Delta 88
...It drove fine.. Seemed an easy fix. While the car was being repaired they also discovered the jackshaft had to be replaced. We were told 350 for new or we could try a used part. Of course we ...
...drive in L4 with the hubs in "Free" be the reason? Check the universal joints in the jackshaft between the gearbox and the transfer case. Driving a short distance in 4low with hubs ...
222 questions posted
Usually answered in minutes!
205 Questions
91 Questions
87 Questions
87 Questions
77 Questions