1986 Oldsmobile Regency "sensor" Questions

Replaced crankshaft sensor, car still won't start I have an 06 Nissan Altima and my service engine light came on. Diagnostics check said it needs 2 sensors, crankshaft and speed sensors. Replaced the ...

...not, there's only 6. the injectors are metering by a computer which gather info. from temperature sensor, oxygen sensor, map sensor, throtle position sensor and MAF ...

I have a 91 olds Ninety eight regency elite Intermittently dies code 41 comes up cam sensor circut replaced cam sensor still dies could it be the crank sensor? thank you Michael Dale cam sensor is ...

Need to replace o2 sensor; where is it? replace o2 sensor Hello walt_herd, Thank you for choosing fixya.com. Most vehicles have two O2 sensors; 1. behind the engine the exhaust manifold pipe before ...

where to find low fuel sensor Attached to fuel sending unit in gas tank. The low fuel sensor is part of the fuel tank fuel level sensor, that sensor is located inside the fuel tank and is part of the ...

have a 86 ninty eight will not fire replaced cam sensor and crank sensor check the timing marks twice and make sure crank is on top dead center. if all that checks out ok i would check power to the ...

where is location of heat sensor Sensor for what ? The engine coolant temp sensor ?

1992 olds cutlass 3.1L shuts off low injector voltage which crankshaft sensor is bad it has 2 the engine has a 24X and a 3X sensor which should be changed 24X behind harmonic balancer or otherone Your

1990 oldsmobile 98 error code 34 MAC Car is missing and dies sometimes at stop. replaced ox sensor on manifold, and small idle motor on air intake. There are 2 problems for code 34. First, is manifold

dtc p0171 code DTC and P0171 or 0174 are telling you that the O2 sensors has detected too much oxygen in the fuel mix on either bank 1 or 2 of the engine. In you air intake you will find a square port