...tighten onto pole had melted away, when took off the battery the earth terminal was wet (under rear seat, nothing else in car was damp) since changing strap I can now start car fine but get error ...
...battery cable with a socket wrench. Support the fuel tank and loosen the strap bolts. Disconnect the fuel lines from the fuel tank and disconnect the fuel pump's electrical connector. Access the fuel ...
...strap from the battery or the earth strap from the engine to the chassis. Get someone to turn the engine over whilst measuring the voltage on the starter motor. If you can't do that then unbolt the ...
...Tighten to 20 Nm (15 lbf.ft) 12. Remove container beneath filter. 13. Remove safety stands. Lower vehicle. 14. Reconnect battery negative lead. if you can provide me with an exact year and model i ...
Tighten the main tank straps to 40 foot/pounds and the T-strap to 250 inch lbs. 5 Reconnect the fuel lines in the reverse order of their removal. Lower the vehicle. Connect the negative battery cable.
Question about Chrysler Cars & Trucks
...battery cable and raise the vehicle. Support the fuel tank with a transmission jack. Locate the fuel filter on the top of your Chrysler Town & Country fuel tank. Remove the fuel line from the ...
...battery, starter. Tighten all ground straps at the motor that is in connection with the PCM . It may be necessary to take them off and clean them if they look corroded, but most of the time you can ...
Question about Mercedes-Benz E-Class
...battery cable Raise the vehicle and support the fuel tank with a transmission jack. Fuel line from the front of the tank Ground strap Inboard side of the fuel tank straps and front T strap fastener ...
227 questions posted
Usually answered in minutes!
563 Questions
269 Questions
209 Questions
153 Questions
142 Questions