1991 Mercedes-Benz 350 "truck engine cylinder head" Questions

...help me with the torque settings for a merc 352 engine. That is for the cylinder heads,valve clearance and big end please. Thanx I don't have those specs, but you can get them here ...

...their specs. Click Here! 3/8 Connecting Rod Bolt, Engine Oil, 45 ft-lbs. 11/32 Connecting Rod Bolt, Engine Oil, 35 ft-lbs. Cylinder Heads. Engine oil. (blind hole).

...engine. Install the cylinder head. Install NEW cylinder head bolts. Torque the bolts in sequence, as follows: Step 1: 37 ft. lbs. (50 Nm). Step 2: Plus 120 degree turn. To install: Fig. Tighten the ...

...engine lifting eye from cylinder head. 14. Inspect cylinder head and cylinder block, then replace components as required. INSTALLATION 1. Reverse procedure to install, noting following: a. Clean ...

...cylinder heads 4.9 v8 engine (NOT NORTHSTAR) cadillac. Fig. Cylinder head torque sequence-4.5L and 4.9L engines (not Nothstar, this is 4.6L) Tighten cylinder head bolts, in sequence, to 38 ft. lbs. ...

...cylinder head or both. Running the engine in an overheated condition will cause head gasket failure and often a crack in the cylinder head. The problem you have is coolant is escaping into the ...

...engine. The Cylinder Head Gasket has most likely failed due to expansion and contraction of dissimilar metals. The Cylinder head is Aluminum and the Cylinder Block is Cast Iron. The Cylinder Head ...

...engine oil. Install the cylinder head bolts. Tighten the cylinder head bolts in 2 or 3 steps in the sequence shown to 76-81 Nm (56-60 lb-ft). 1.9 liter Apply a light coating of engine oil to the ...

engine. In some cases, cylinder head cracking may result in such severe injury to the engine that it must be replaced. As a result, most motorists try to prevent cylinder head cracking, as an ounce of

engine oil to the cylinder head No. 1 bolt threads. Step 2: Tighten the cylinder head No. 1 bolts to 15 ft. lbs. (20 Nm), evenly and gradually, in sequence.NOTE Use a 12-point socket wrench to tighten