2005 Chevrolet Colorado "replacing fan motor resistor" Questions

...resistor as you correctly diagnosed, but the new resistor is blown because the fan motor is drawing to much current and blowing the resistor back out, replace the blower motor and resistor

...fan switch only works on high. When this first started it would work sometimes on the 3 other settings when it wanted to. Now it only works on high. The Dealer ship service department told me that it ...

...fan will only run on high speed sounds like the blower motor resistor is bad,thats what controls the speeds. replace that and your fan should work just fine, good luck. Check the blower resistor to ...

...as well as the wiring harness: http://www.355nation.net/forum/how-tutorials-reviews-service-bulletins/6401-how-hvac-fan-motor-resistor-connector-replacement.html Sounds like the fan resistor has ...

...a battery. What is wrong with my ac? It seems to be bad capacitor, else the fan motor must be replaced. All necessary chevy ac parts can be found at

fan control switch on my truck located underneath the temperature control panel? Or is it actually on the passenger side under the glove box? If you are asking about the blower motor resistor, then it

replacing your wiring going to the resistor which is acdelco part number PT1231. I have had the problem of speeds 1,2, and 3 intermittently working while 4 always worked. Afterreplacing this part, all

heater fan does not work i have already replaced resistor, repaced fan motor, replaced control panel, replaced wiring harness and it still does not work. Did you replace this?

...fan motor on the passenger side duct work. It will have a harness plugged into it. It's mounted with 2 sonic welds, to remove it pry under the mounting points to snap the welds. The replacement ...

...replacing and read somewhere that it was on the fan box located behind the glove box. The only thing i find there is an electrical connection. When I unplug the connectior, nothing works on the fan. ...