2005 Chevrolet Colorado "daytime running lights turn" Questions

daytime running lights. Hello. It seems your Chevrolet has either faulty headlamp relay(s) or its headlamps are connected in series; if one don't light, neither will the other one. I can't explain why

daytime running lights and blinkers do not work Changed light bulbs and fuses for daytime running lamps and they still do not work. the lights are controlled by a module, it is the DRL module, replace

...Daytime running lights come on when vehicle is started. Turn lowbeam headlights on, daytime running lights go out. Turn high beams on and they work fine. Turn lights off, daytime running lights come ...

Daytime running lights not working The daytime running lights on my Yukon do not come on and haven't for some time. I know that the bulbs are fine because when I unlock it, the lights light up with no

...daytime running headlights also come on now with the daytime running lights (turn signal lights). Problem occurred around the same time both of my remotes quit working. Daytime runnning lights mean ...

...Daytime running lights on require 6-9 volts from the module. So when the original lights are replaced, the daytime running lights will not supply enough voltage to the HID ballasts to turn them on. ...

daytime running lights My daytime running lights wont turn off unless I pull the fuse Check the relay for the daytime running lights - probably stuck on ya. My 94 didn't have them, so I can't tell you

daytime running lights work but go out when I turn headlights on. Ruled out headlight switch, bulbs, fuses, relay, ground, and DRL module. 98 silverado 1500 has no high beams. headlights work with ...

Daytime Running Lights' is worth typing in full. It is part of the Body Control Module according to this http://www.hemanual.org/drl_control_module_repair_procedures-2827.html Lots of information here

...it will light for certain functions but for others it will not. Mine was lighting for the daytime running lights, yet was unlit for turn signals. Replacing the affected bulb solves the