2005 Chevrolet Colorado "chevy check engine light" Questions

...chevy colorado code p1133 check engine light code p1133 This code is for insufficient switching of the oxygen sensor. Make sure you don't have any other codes, misfires, vacuum leaks and/or ...

...cap off on 2006 chevy Colorado and check engine light came on. Replaced cap now how do I get check engine light off. You have other EVAP System issues The Gas Cap, being okey would turn off the ...

chevy colorado engin light is on the check engine light can come on for any number of reasons mostly emissions related problems. the first step is to identify the code responsible for the light. there

chevy colorado engine light came on I have a 06 chevy colorado , coming home today after work ( 20 miles ) my engine light came on. It still runs fine just wondering why is it on . any advice would be

...chevy colorado why does the reduced power light come on , then the truck stalls. If you pull over and shut down the engine and wait a 30 secounds the truck will restart and run fine until the next ...

...chevy colorado (assuming problem was repaired - O2 Sensor)? The only way to clear the check engine light is with a scan tool.Disconnecting battery will not clear codes.Hope this helps.Good luck. Most ...

...check engine light on a 2005 chevy colorado. remove the battery terminals for about 15 mins, that will reset your computer, if you turn it back on and get the same check engine light there is an ...

chevy colorado (2005) loss of power and check engine light on- how to diagnose problem? take it to local parts store that scans for codes for free, you will get a print out with any codes that are set

in 2006 Chevy Colorado. Replaced gas cap now how do I get check engine light off? If all it was is that you did have it off it will reset by the 3rd drive cycle. It may take between 50 & 200 miles

...chevy colorado z71 ls, the check engine light is on constantly, and flashes sometimes. Was idleing rough, had diagnostics done, show misfire cylinder 5. figured it needed atune up changed all plugs ...