2005 Chevrolet Colorado "beam regulator" Questions

...be around 13.5 and should not drop to less than 12.5 with all accessories turned on (including high beams). Voltage should not continually drop over time either. A steady high voltage reading (14 ...

Headlights beams not not aligned Headlights beams are not aligned. I am not able to align the headlights. It seems that the lights do not respond to the alignment screws. if I turn the srews nothing ...

...hooked up the driving lights to the fog light fuse but that is wrong . I want to hook up to the low beam circuit of the car so that the driving lights can only be used when the car is on low beam . I ...

my low beams went out on 1983 pu but i still have high beams, battery was boiling, just replaced voltage regulator had a red wire that ran from alt to battery, replaced it back on battery after i ...

all work fine. What is the Reason for failure of window regulator, headlight low beam and radio going out at the same time, and start working again later? Loose connection or body control module fault

regulator inside the alternator is probably stuck closed. It is unlikely that the low beams not working is connected to that problem. mostly the low beam bulds are burnt out or something is wrong with

...beam slots). Start vehicle. Note voltage. Should be somewhere between 13.5 and 14.4 Volts DC. (If you read neg voltage, you've got the leads reversed!!!). If too high, voltage regulator may be shot. ...

head lamps are burning out one at a time,first low beams then then high beams ending on the left side,smells of burning plastic inside the vehicle. check voltage of battery while vehicle is running if

Why did all headlights go out on my 1977 Lincoln Mark V? The high beams won't work either I recently had a new alternator put on and two weeks later all my front headlights and high beams won&

...work. I live in Virginia and the law in Va. says that the lights have to turn off when the high beams are on. I'm not quite sure how to wire the lights to turn off when the high beams are on. ...