2001 Chevrolet S-10 "reverse takes second engage" Questions

reverse. I let the truck idle for 30 seconds and very slowly all my gears came back but it was very weak when I drove it home. I checked the ATF level and it looks dirty but the level looks good. When

...reverse so if it takes longer than 1.5 seconds here are a few things it could be:shift cable adjustment,low line pressure,worn direct clutch, first/reverse brake worn or a worn or damaged overdrive ...

...Reverse. Forward gears have no problems but when i put it in "R" it takes like 5 seconds before engaging. Fluid level is ok. Basically you should have the vehicle's reverse circuit pressure tested by ...

...takes a second to engage reverse but it will engage You do have a problem then. Slow reverse engagement can be the sign of a failing transmission. Use reverse as little as possible under as light a ...

...engage in drive or reverse, but would run fine after, changed trani fluid & filter, was okay, then would take longer to engage. Now it will not engage at all.If I press on gas firmly, it will move a ...

...reverse and takes a second to catch in drive overdrive and second gear you need it rebuilt. lol the clutches are worn out in forward gears, producing the late engagement and slipping, and reverse is ...

second opinion. To start at the beginning, if it works in reverse but not drive the linkage is working. When you put the transmission in low or second you are bypassing most of the sensors and valves.

...takes the most transmission pressure to engage reverse, third, and fourth gear in an auto tranny. In an auto tranny, the shifter is connected to a linkage that manually shifts between the different ...

...takes 10 seconds to 1 minute to engage any forward gear.(1,2,D)Once engaged,everything works normally.Reverse will always engage immediately.Just changed fluid,filter,and added 1 bottle of Lucas ...

...seconds to engage in reverse? Does it seem to slam into gear when it does engage? If so you need a Valve Body. It' in the top of the transmission and it is about $350 to replace with a good used ...