...assy,plugs cap and tbi. I even went and unplugged the safety switch for the clutch pedal. i'm so lost can anyone help?? have you tried replacing the neutral safety switch located on the
...like you need to replace the clutch safety switch sound like the contacts inside the switch have went bad . I don't think you can adjust those due to it being a hydro system . Hope this helps
...by pedal when pushed. Probably a safety feature to insure vehicle won't start unless clutch in, just in case it's in gear. May be adjustable, but if not, or adjustment doesn't help, replace
Question about Chevrolet S 10
clutch) safety switch needs adjusted or replaced. &
...clutch safety switch, whenever you push the clutch in, the safety switch is made, thereby engaging the starter. What you will need to do is remove the plastic around the steering wheel and revome the ...
...replace ign switch, some jeeps have a safety netrual switch, i believe some even has switches on the clutch pedal, i am not a hundred percent sure, just throwing some suggestions out to you, also ...
...clutch slave cylinder, remove the hydraulic line, the two mount bolts. replace the slave cylndr. you got clutch !!!! ps i dont recall there being a bleed valve. it should bleed by gravity james ...
Clutch switch if not automatic). If the current doesn't go thru the switch replace the switch. If you are not getting current to the switch in the first place check the ignition switch. If the current
...clutch safety switch. The car will not start if the clutch in not depressed. Look under dash at the clutch pedal arm. There is a switch that looks like this: ...
...safety" switches that break the circuit if the car is not in park or neutral, and this switch can either be under the shifter cover or built into the transmission. You can try jiggling the shifter ...
934 questions posted
Usually answered in minutes!
1,473 Questions
904 Questions
790 Questions
747 Questions
620 Questions