2001 Chevrolet S-10 "remove put radiator chevy" Questions

...lower radiator hose try removing it at the water pump less danger to break the radiator remove hose put it down and everything will come off thanks pierre it could be the red coolant Chevy ...

...remove the belt and use the tensioner to put it back.  You draw the belt and pulleys on a sheet of paper before removing, otherwise there should be a small diagram of the belt and pulley ...

remove the thermostat from the housing. Clean the remains of the old gasket or sealer from the housing and outlet. Install the thermostat and gasket to the intake manifold in the same direction it was

...remove one of the hoses and make sure coolant flows out while someone fills radiator or resivor bottle if no radiator fill is avaliable.once coolant comes out quickly put hose back on and tighten ...

...radiator and fan assembly from a scrapyard. Since you can't find the pump, it is safe to assume you have never done this work before...You can get yourself a vehicle specific manual that covers all ...

...radiator replaced and thermostat installed. Has V6 Vortec egine Sounds like you have a restriction in the heater core. You can try removing the heater hoses at the firewall and putting a garden hose ...

...put a big drain pan under the bottom radiator hose and remove it. If the engine is hot there is a petcock on the bottom of the radiator it will be on the side under the hood, either side usually ...

...remove the lower
radiator hose. Figured i would put this here for anyone else doing the same job. if doing water pump be careful of lower radiator hose/heater core hose. the plastic becomes ...

...remove the hose. Put the new hose on, tighten the clips. Top up the radiator.

The top one is easy, the bottom one is more ...

...put a hole and or damaged them where need to replace ---if dented dont need to replace --you will need to remove the fan =shroud-upper cover ==and grill --remove the upper and lower hoses and trans ...