2001 Chevrolet S-10 "engine" Questions

...DON'T FORGET TO RATE!!!! After removing the cooling fan assembly, remove the water pump pulley-4.3L engine Location the water pump pulley bolts-2.2L engine If the pulley turns when you try to loosen ...

How to properly remove 2.8 engine out of 85 chevy s10 4wd The service and repair manual with pictures and diagram will provide you step by step knowledge to solve the problem easily and you will get ...

oil leak from bottom rear of engine does'nt appear to be pan or rear main maybe higher on engine,maybe oil sending uniy? oil leak from bottom rear of engine does'nt appear to be pan or ...

Chevy s-10 pick up truck ,158154, 4cyl engine, wont start Chevy s-10 pick up truck, 158154 4cyl engine, wont start, milky looking substance on dip stick. Please help! Milky substance on your dip stick

how can i remove the oil pump without removing the engine in my 97 chevy s10 2.2lL https://itstillruns.com/remove-pan-1997-chevrolet-s10-6524056.html---this is stated for 2wd ------this is 4wd ...

...to distribiture cap 991 Chevy S10 firing order The firing order for a Chevy s10 depends on which engine you have. 1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise. ...

I have a service engine light on-had the code read vacuum leak at engine changed gas cap-changed vac line from carb.now what is purge or vent solenoid ? vent solenoid is that open or close the air to ...

...My name is Roger and I will answer your question. If you have no coolant in the radiator the engine Will overheat and cause severe engine damage. If you mean you have only water in the

I replaced a 1996 S10 engine with a 1998 2.2 engine, with knowledge of the crank position sensor difference. Is there any way I can make it work? IF YOU HAVE SAME ENGINE YOU CAN TRY REPROGRAMING USING

S10 pickup misifirng when light highway load My 2000 S10 2.2 L engine misfires or stumbles when lightly accelerating. At a certain engine speed and throttle position, the engine will miss. Doesn't ...