2000 Chevrolet Silverado "remove turbocharger" Questions

Ad

Question about Chevrolet Silverado

1 Answer

Remove or disconnect the following: Negative battery cables Right front wheel and fender splash shield, on 6.6L engines Turbocharger exhaust pipe, on 6.6L engines Mounting bolts/nuts and shim, if used

Ad

...turbocharger on my 6.5 diesel... can you help? I purchased the kit to do the rebuild, but it had no instructions and my mechanic has not done this before, YOU couldent if you had the right equipment ...

Ad

Question about Chevrolet Silverado

1 Answer

...remove the turbocharger from truck to replace oil cooler. Am unable to get it out. It is a 2003 ford 250 superduty tubo diesel 6.0 litre 1 - Remove the turbocharger intake tube 2 - Disconnect the ...

Question about Chevrolet Silverado

1 Answer

...Remove the turbocharger bracket stay. Disconnect the turbocharger oil pipe. Remove the turbocharger and exhaust manifold as an assembly. Remove the No. 2 turbocharger water pipe. Remove the oil pipe. ...

...remove the turbocharger's compressor inlet centre hose (from the aluminium side of the turbo). Then see if there's in plenty of oil coming out from the hose and from the turbo. I'm 100% ...

Question about Chevrolet Silverado

1 Answer

...Remove the air inlet axial center hose of the turbocharger, in other words the compressor air inlet hose. Then check axial & radial gaps of the turbocharger rotor. Check also the turbocharger oil ...

...remove the turbocharger's compressor inlet centre hose (from the aluminium side of the turbo). Then see if there's in plenty of oil coming out from the hose and from the turbo. I'm 100% ...

Turbocharger was out of oil for months. It is now ruined. Can we remove it and still run the engine in our otherwise very good 1992 Buick Park Avenue? see if a local (dare I use the word) junkyard may

Question about Chevrolet Silverado

1 Answer

turbo you need a chilton or GM repair manual.read through the turbocharger removal procedure.removing turbo with out repair manual is hard because you have to remove many things to remove turbocharger

Question about Ford Cars & Trucks

1 Answer

...the two 8 mm retaining bolts to 90 in.-lbs. If equipped, remove the shield covering the filter and discard. The new turbocharger wastegate regulating valve solenoid is available as P/N

Not finding what you are looking for?
2000 Chevrolet Silverado Logo

1,592 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...