2000 Chevrolet Silverado "brake caliper shims" Questions

Ad

Question about Chevrolet Silverado

1 Answer

...brake. What's the rub? I've applied lube in all the right places. Could the "re-manufactured" calipers be not so good? I took the tires off, turned the lug nuts to try to determine the source of the ...

Ad

Question about Chevrolet Silverado

3 Answers

...caliper, new pads and also new brake hose. Same problem still. It is chewing up the outside surface of the rotor while the inside of rotor is fine. That rules out the ABS. The only other cause could ...

Ad

...brake pads on 2000 chevy silverado Place truck on a heavy jack stand. Remove tire With a large Torex or allen bit remove caliper bolt(s) Some swing out with only one bolt out. remove pads with chisel ...

...brake fluid is dirty and could cause the abs motor to groan but you would just have to flush the system, When you don't put your foot in it on the brakes it will make some noise even new, I have a ...

Question about Chevrolet Silverado

2 Answers

...brake caliper. Remove a small amount of brake fluid from the master cylinder. Install a used brake pad into the caliper and compress the caliper pistons. Apply disc brake grease to both sides of the ...

Question about Chevrolet Silverado

2 Answers

...brake caliper (exploded view) Loosen the caliper bleeder. Hold the slide pin; remove the 2 mounting bolts and remove the brake caliper from the support. Support the caliper. Open the brake bleeder. ...

Question about Chevrolet Silverado

2 Answers

...brake caliper assembly. Remove the 2 anti-squeal shims from each of the 2 brake pads. Remove the wear indicator from each of the 2 brake pads. To Install: NOTE: When replacing worn pads, the ...

Question about Chevrolet Silverado

1 Answer

...caliper was depressed all the way. I do not have any leaks to the brakes. Master Cylinder? Should I try installing the pads with the shims on again? Bleed brakes again? bleed the brake again. if the ...

Question about Chevrolet Silverado

1 Answer

...shims and I am pretty sure that I the caliper was depressed all the way. I do not have any leaks to the brakes. Master Cylinder??? Should I try installing the pads with the shims on again??? probably ...

Question about Chevrolet Silverado

1 Answer

...brake pads on my 1999 GMC Sierra will not fit in the caliper with the shims installed. Should I grind them to fit or install without the shims? make sure piston is pushed all the way into caliper. if ...

Not finding what you are looking for?
2000 Chevrolet Silverado Logo

1,592 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29492 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...