...scanner and the error code came up P0102 MAF. I replaced it and yet still I have the same problem. Any suggestions? I love my car, but last night is stalled before I came to a complete stop, and the ...
...need a hand-held obd2 scanner to clear the codes. Advanced Auto store will do it for free if you have one in your area. Other part stores will also do it for free. You can disconnect the negative ...
scanner should of detected a code that starts with a P and then followed by some numbers. I gather your check engine light was on? Is there any symptons that you can tell me about---how was the Blazer
...TO FIND SOMEONE WITH A HAND HELD SCANNER TO READ CODES AND THEN TO CLEAR THEM !!!!!!! REMEMBER TO RIGHT THESE HARD CODES DOWN THEN HAVE THEM SEE IF THEY COME BACK AFTER THE THE CLEARING OF THE CODES
...If you have a warning light on the dashboard - you need to have somebody read the error codes. The hand-held (OBD11) scanner used for reading error codes can also reset any 'check engine'/warning ...
Question about Skoda Cars & Trucks
...need your help my Skoda Fabia comes on EPC light on car not starting but I checked with vcds scanner I found no fault code the light is on because there is a fault unless the scanner in use is very ...
...do I fix? first scan the PCM for trouble codes using a hand held scanner, Then repair codes by replacing failed sensor as needed. If no codes are present then try replacing the idle air control
Question about Chevrolet Impala
...need to use a scanner to clear any kind of code on my car computer so the idle control will reset just a couple more things can i get any kind of scanner and do it myself I had a place plug one in to ...
...need to reset computer after new parts are installed. This can be done with a hand-held scanner or diagnostic scanner Yes, because the vapor recovery fuctions on the vapor pressure of the fuel
...scanner, Then repair codes by replacing failed sensor as needed. If no codes are present we would check the crankshaft sensor. If you're saying that you have fire only from the distributor, but going ...
1,706 questions posted
Usually answered in minutes!
2,177 Questions
1,746 Questions
1,386 Questions
1,400 Questions
1,452 Questions