1991 Chevrolet K1500 "rod neutral gear" Questions

Ad

Question about Chevrolet 1500

1 Answer

...neutral safety switch) has a longer shift arm. I have no personal experience with using this longer shift arm, in an application that calls for the shorter arm, but I think that may be part of your ...

Ad

...neutral. Place lock cylinder and switch in positions noted in steps 3 and 4. Fit actuator rod into hole in switch slider and secure switch with retaining screws, ensuring switch does not move out of ...

Ad

Question about Chevrolet 1500

1 Answer

WITH THE TRANSMISSION STILL IN NEUTRAL . MOVE THE GEARSHIFT ROD TO THE RIGHT TO ITS STOP.TIGHTEN THE CLAMP BOLT TO 18 FT LBS.TEST THE SHIFT LEVER PLAY SHOULD BE THE SAME IN ALL GEARS IN ALL DIRECTIONS

... is a lever, that is connected by a rod. unbolt the rod, and you can shift the transmission into neutral. just go 2 clicks, just like pulling the gear shift handle. Old mechanics trick. hope this ...

...gear shift with the transmission? First, are you certain that you installed the clutch and throw-out bearing correctly? This may take some trial and error - if you replaced the clutch, you know your ...

Question about Chevrolet 1500

1 Answer

neutral. Loosen the locking clamps so the shift rods slide freely. start with the reverse lever, which is the inner most rod on the shifter and tighten the rod nut against the swivel. Then tighten the

...rod at the trans and mounted to it. No, a neutral safety switch prevents you from starting the engine in any gear except park or neutral. No the neutral safety switch allows for the starter to only ...

Question about Mercury Cars & Trucks

1 Answer

neutral gear..WHATS WRONG? THANK U Sounds like it is not adjusted or centered on the connector rod https://www.youtube.com/watch?v=xgyAPIqhkmY May have issue inside car adjustment also. link below may

...the car will stalls out and dies. When I put the car into any gear it wants to stall out and die Check that your not in 2 gears at once , put in to neutral by moving gear shift rods at the

Question about Chevrolet 1500

1 Answer

...and ive adjusted the clutch it is engaging all the way. does anyone know? Did you adjust the shift rods from the shifter to the trans shift arms. Take your shift rods loose and put shifter in

Not finding what you are looking for?
1991 Chevrolet K1500 Logo

332 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...