2004 Buick Rendezvous "size allen wrench change brakes" Questions

...ALLEN WRENCH. MEDIUM SIZE C-CLAMP TO PUSH IN THE CYLINDER ON THE CALIPER , AND HIGH TEMP BRAKE GREASE TO PUT ON CALIPER BOLTS WHEN RETIGHTENING. HOPE THIS HELPS CRAIG. HERES A LINK TO LOOK AT I FOUND ...

What size of Allen wrench do I need for my Pontiac Sunfire 2002 to change the front brake pad Usually allen wrenches come in a set. Try a 3/8 allen wrench.

...size Allen wrench do I need for a Chevy van g20 1991, to change my brakes? I think they were a 3/8 allen. I also found that a torx bit T50 I think works also. GM changed the sizes around on some that ...

...size allen wrench to remove front brake caliper i just changed my front rotors and pads on my 2001 escape, 6 cylinder. everyone was wrong on the wrench sizes, including the idiots at my local ford ...

...size Allen wrench for 2001 escape front caliper? i just changed my front rotors and pads on my 2001 escape, 6 cylinder. everyone was wrong on the wrench sizes, including the idiots at my local ford ...

size allen wrench to take off front disc brakes on 2000 chevy silverado 4.8 l The caliper guide pins will usually have either a 3/8 inch or a 5/16 inch allen head bolt. If the brake calipers are found

...size tool to change front pads on my 2006 tribute, back calipers took #45 torq but front all stand and metric torq or allen wrench won't fit buy a set of the torque bits they come in sets of 4 or ...

...allen wrench or socket on the bolt. Then put a CRECENT wrench on that end of your ratchet....you need leverage....trust me, it will break loose. i use a mid sized hammer to tap the bolts free at end ...

what size allen wrench to change the brakes Hello, most brakes are changed with a socket set either standard or MM. Hope this is helpful.

...bolts holding the caliper and what size socket is needed? They may not be bolts, might be the allen wrench type, on the back side of the calipars, one on top and one on the bottom. Not sure what