...is smaller then hi pressure port also low pressure port is on line feeding compressor(suction)hi would be on other line (pressure) Low side is the line running from the compressor to the
...point to refill 134a? If your using gauges, R134A suction pressure should be about 65 psig nominal. Be carefull, discharge pressure should not exceed about 125 psig nominal depending on ambient
...suction pressure 134a Freon? to start with it will be high vacuum reading as suction is low pressure secondly it means that the system is vacant of any gas and is well below 0 psi if it is a high ...
...side of the suction accumulator/drier (19C836) , used to measure pressure, and in the evaporator to compressor suction line (19867) near the accumulator. (The freon tank) Use R134a please rate, ...
Normal suction pressure .what should the gauges read Air Conditioning? Motor Vehicle !! What Refrigerant? What Ambient Temperature Low side?? R-12 ---30 lb R134a--40 lb
...pressure service port. This port is located on the suction line near the compressor. The suction line can be identified by it's size, it being the larger of the two line connected to the compressor. ...
...pressure line is cold and condensates then the system is cooling properly (internally). Then your problem is probably in the HVAC controls, i.e Blend Door. If the compressor is running and the lines ...
with "L" marked on the cap. Is the the injection point? yes, L is for low pressure side or suction, attach refrig. to this port added freon to my honda accord and its still not cooling
Question about GMC Cars & Trucks
...suction/discharge hose, condenser, accumulator, low & high pressure switch cycle switch, flushed evaporator. vacuum 29 inches. R134A will not load. not mentioned but did you replace with equipment ...
...suction port, or low pressure side of the system. If you do not know what one that is, you might want to get some help. You need to have the proper amount of freon in the system or there could be ...
616 questions posted
Usually answered in minutes!
