1992 Buick Century "injector pulse" Questions

...injector pulse i tried a module but still same problem. fuel is getting to rail but no message at injectors. looking at the schematics, well the PCM controls the pulse width to the injectors , BUT , ...

...de-celleration to a stop. One week ago vehicle stalled and would not restart. No pulse to the injectors (fuel pressure at the rail 42psi) and no codes @ ECM. Replaced: Crank sensor, cleaned all ...

Injectors are not opening on a 1992 buick century 3.3 I do have spark , plugs are dry, have proper fuel pressure on fuel rail,brand new fuel filter,fuel pump runs properly.ect Wondering exactly what ...

why wont my 1998 buick century start. It cranks over but wont start.I have spark at the plugs and fuel at the fuel rail? ck for injector pulse

...pack, Control module, brain,spark plugs wires...any ideas I'm not sure of engine Size? Did you check the crank sensor? Any applicable trouble codes? Do you have a fuel injector pulse, engine

...me nuts and making me mad. ok since you said you changed the plug and coil pack, start with the injector wire harness and look it over for any shorts or grounds, also make sure the terminals on ...

...for spark at the spark plugs. If spark everywhere, check fuel pressure and injector pulse. Can you check applicable trouble codes? To check codes, yourself, at the least, you need an obd2 code

car will not start - like key is not turned - fuel pump will not turn on (no lights) and can't be jumped. Is there a way to check ecm? you can check the ECM by testing relay sockets that it should be ...

...is good The either just replaces the fuel not asked for by the tps & ecm then adjusts the injector ...

...You just hook up the gage and see what the reading is. Fuel trigger is check with a noid light. The injector gets unplugged and the noid light gets plugged in to the injector clip. With the engine ...