1988 Buick LeSabre "crankshaft sensor alignment tool" Questions

Ad

Question about Buick LeSabre

2 Answers

...crankshaft position sensor should be located behind the vibration damper/harmonic balancer and it will have to be removed before the crankshaft position sensor can be replaced. (Let me know if you ...

Ad

...crankshaft sensor on a 3.8L in a 97 buick lesaber Hi, The sensor is located to the right of the crankshaft behind the vibration dampner (harmonic balancer). You will need a balancer puller and a ...

Ad

Question about Buick LeSabre

1 Answer

...Crankshaft Position (CKP) sensor (refer to the illustration) and install the TDC timing peg. Fig. 15: Remove the plug bolt by the Crankshaft Position (CKP) sensor and install the TDC timing peg Raise ...

Question about Buick LeSabre

1 Answer

...Crankshaft position sensor Lower oil pan No. 1 chain tensioner Accessory drive belt tensioner Support the engine with a suitable engine lifting device. Remove or disconnect the following: Engine ...

...crankshaft position sensor for hyundai elantra 1999 I replace Crankshaft position sensor with a new one, but it my car doesn't start. I put back the old one once again and it doesn,t start at all. ...

Question about Buick LeSabre

1 Answer

...sensor Crankshaft Position (CKP) sensor connector, bolt and sensor CKP sensor spacer bolts and spacer 5 bolts securing the upper oil pan to the front cover Bracket bolts and the bracket for the ...

Question about Buick LeSabre

1 Answer

Crankshaft Position Sensor I need to change my Crankshaft Position Sensor on my 1997 Pontiac Firebird 3.8L,where is it located? The crank sensor is on the front of your engine behind the harmonic ...

...crankshaft sensor ring from the crankshaft.Rotate the crankshaft until the timing mark on the RH camshaft sprocket is approximately at the 11 o'clock position and the timing mark on the LH camshaft ...

...crankshaft/camshaft sensor located where the serpentine belt passes over the crankshaft pulley. Remove the belt and the harmonic balancer--the sensor is located just behind the balancer. It requires ...

...sensor.There is a special tool that VW uses to align the ring on the crankshaft.If you do not align the timing marks,the vehicle will not start. Dear joseph you didn't mentioned for what reason you ...

Not finding what you are looking for?
Cars & Trucks Logo

219 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

1998 Buick LeSabre
1998 Buick LeSabre

897 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...