2001 Oldsmobile Alero "spark plug mis firing" Questions

...spark plugs and one plug looked as if it was dipped in oil the car does not smoke so i dont know if its my piston rig or valve cover or if thats why the car runs so bad or if its enjector or ...

...spark plugs,wires,air filter. New battery and all. However im still having the issue. my check engine light is not on but had been on prior to the tune up. When i took it and had it hooked up at the ...

...Spark Plug wires have been Crossed or Wired out of Sequence / Order ...SOLUTION will cover many checks you must make . 1 st be sure Plug # 1 and each firing order Plug wire is matched up To proper ## ...

...spark plug keeps mis fireing. rough number two spark plug keeps mis fireing. rough start up when cold it may not be the spark plug it could be the spark plug lead itself or where it plugs into the ...

...engine mis fire no power Flashing engine light is saying that you have a "mis-fire" you need to address. Usually this will be a bad spark plug wire or spark plug. Simple fix. You can do it

...spark plug wire, or a bad sensor will cause your mis-fires. misfire on my Impala was caused by bad spark plug wire on the back bank which was getting a regular shower of antifreeze from a bad intake ...

...wires have been replaced. i would check the order the leads go from the distributor to the spark plugs as 1 or 2 of these might be incorrectly placed on the wrong spark plugs causing the

...mis fireing for a while the fault being number four injector being down could be a number of things but I would check the coil leads and spark plugs to start with to make sure it is noy electrical my ...

...spark. checked elec current to fuel injector okay Try to see if you can get view the are where the plugs are firing in the dark. Check for arcing off the plug or wires to the metal engine parts. I ...

Scanner said #4 cyl mis-fire changed #4 coil still reads #4 mis-fire any ideas Replace the spark plug and if the problem still exsist replace the the ignition wire to the #4 cylinder.