change oil light is still on, how do i reset the computer? 2000 oldsmobile alero How to Reset the Change Oil Light After changing the engine oil, the system must be reset. With the ignition key to ON,
...change the oil. you probably won't need a diagram. If you know where the oil pan is. Under the car. There is the oil pan and it has a plug. Put an oil change container under it and remove the plug ...
change oil light I just change my oil in my 2000 alero and I can not get the change oil light to go off? After you change your oil you must reset your system to start tracking your next oil change. ...
...other problems other than an oil leak? The last time I got my oil changed it was 1000 miles over and the light never came on but previous to that time it always has What light oil change or low
Question about Oldsmobile Alero
...change oil light after the oil is changed? You don't need to do anything to turn off the light, it's not a change-oil light, but low-oil level light. Check whether the oil level is according to ...
...oil change light in a 2003 olds alero turn key on (dont start engine) floor gas pedal 3 times 1,2,3. turn key off, now start engine it should go off, if not try it again. Should be listed in your ...
...CHANGE OIL FILTER AND OIL AGAIN.WHEN SEAFOAM CIRCULATE THROUGH THE ENGINE BLOCK FLUSHING OUT CARBON SLUDGE BUILD UP IN OIL PASSAGES.IT WILL GO TO OIL CRANK CASE GETTING NEW OIL DIRTY.SO CHANGE ENGINE ...
...oil change but the "oil change" light is still on, how do I reset it? drivers side fuse block, remove cover 1.turn key on (engine off) 2. push the reset button in 3. change oil light will start to ...
change oil light remains on after oil change and light over license plate does not work after bulb change To reset the Change Oil Light: Open driver's door and open fuse access panel Turn ignition key
1,875 questions posted
Usually answered in minutes!
1,478 Questions
1,097 Questions
1,065 Questions
830 Questions
662 Questions