1998 Oldsmobile Bravada "remove blower motor olds" Questions

blower motor on my 98 olds bravada the blower only works every now and then sometimes i can hit the air duct and it will come on is there anything specail i need to do to change it out. you don't need

...blower motor for 98 olds brevada located. i need to replace it inside the plastic housing on the passenger side of the engine compartment - plastic housing has to be cut open and fan removed - not a ...

...blower. remove the three screws holding the blower motor, pull blower and fan straight out. remove fan from old blower if replacing with a new motor. good-luck!! 99 olds intrigue. Water from A/C ...

...Remove the blower motor cooling tube from the blower motor. Remove the four retaining screws. Turn the motor and the wheel assembly slightly to the right so that the bottom edge of the mounting plate ...

remove glove box to get better access to the blower motor. resistor is located beside the blower fan motor. with glove box removed, then you will not have to stand on your head doing the job, good-day

...Remove the blower motor's electrical connector and discard the old blower motor. Install the new blower motor in the HVAC cavity and replace the 8 mm mounting nuts. Reconnect the blower motor's ...

blower motor 7.remove fasteners and blower unit it might be a good idea to take the old blower motor to car parts store to make help make sure that you get the right replacement part now to reinstall:

...remove 3 screws from blower housing, pull blower motor and fan straight down. if putting in a new motor, use cage from old blower. the resistor for fan speeds is located beside motor.

...and fan straight down and dis connect electrical connector. if replacing blower motor, remove fan to put on new motor. 99 olds cutlass, have a good day !! just take your time and it is not that

...blower cage on it remove the one from the old motor. Reverse the procedure to reinstall the blower unit. Should You need further help please just ask. Please rate the answer you received. Thank You ...