1997 Oldsmobile Cutlass Supreme "replacing filler neck auto gas" Questions

...filler neck has a restrictor inside to stop people syphoning gas out/leaking when turned over....so fill it slowly... my car did the same thing replaced the charcoal filter and problem ...

...filler neck of the fuel tank of 1995 Plymouth Acclaim? Was not easy repair job, to remove the filler neck of the gas tank. I have to disconnected first of the outside to be able to jiggle the filler ...

...filler neck , then we can break down the fixing from there . Check to make sure its not a leak. If its a leak, there is a product at Most Auto part stores that will stop a leak even when its leaking ...

...filler neck. or remove the filler neck. and when you get the neck out of the tank you will see another tube/hose in the center of the filler tube cut about 2" of the end of the center tube. the ...

filler) and replace the gas cap yourself. i might suggest replacing the gas cap and then having an Auto Zone or Napa reset your computer to see if the cap was the extent of the problem before i paid a

filler neck and then there is a larger hose that appears to come from the filler neck. Those are in good condition and are not leaking, but it comes out of the hose that goes down to the quarter panel

...you need a new intakemanifold gasket, and oil pan gasket, and the filler neck for the gas. all easy repairs. but the grinding noise? make sure you replaced the rear brakes if equiped or drums if

...hose connections---intake leak---EVAP canister purge valve check for vacuum leaks (vents -auto control-manifold-brake booster etc). Check for cracked /loose hoses on the tank/filler ...

...filler neck gasket or the tank gasket if so run the tank down to almost empty or drain it out and then do your thing replacing what's wrong use a small flashlight only no high heat from spot lights ...

...filler neck to the tank may have a crack or loose. Check that Does the gas leak out only when fueling, or all of the time? there is a large diameter rubber hose connecting the filler neck to the tank ...