1997 Oldsmobile Cutlass Supreme "replace cruise control lever" Questions

cruise light does not come on on the dash either. it worked fine but started going off when i would turn my right signal on to change lanes. left signal had no effect. First check the fuse in the fuse

...REPLACE the TURN SIGNAL SWITCH. I found instructions at http://tss.likeabigdog.com/. A couple of errors compared to the 1995 model, like 4 screws hold the airbag to the steering wheel. Plus, the bolt ...

replace both switches. That one might be to cut off the cruise control. I could look up the wiring diagram if you really need it. No, you don't have to replace both. The way to test the switch off the

...cruise control but the signal lever that broke has cruise control would the lever with out it be compatible with my car Hello: Yes it will work but you will have to give up having cruise

cruise control, the speed does not "hold." if the cruise control is on a lever off the side of the steering column it is most probably the lever assembly that is the problem, I had the same problem on

...cruise control wire into There are 2 versions of each (car and multi lever): with and without the cruise control. Are you sure you got the correct lever for your car? Because the connectors are ...

...replace cruise control switches on 98 ... How to replace cruise control switches on 98 . ford explorer. More likley you want to have the transducer or the electronic equivalent checked first. The ...

cruise control cable has probably fallen off the throttle lever under the hood. The retainer vibrates loose over time. Either replace the cable or find a way to keep the cable attached to the throttle

cruise control wont work on 1994 suburban You can check for broken wires on your turn signal lever where it goes into the steering wheel column or the cruise control module on the firewall on the ...

...cruise control no longer works. Is it a fuse issue or something else? Thanks. Could be a fuse and could be the cruise lever itself. I've replaced a few of the levers. Not a big deal. The plastic ...