...on a 97 cutlass supreme sl 3.1 To replace the water pump on this is very easy. Remove the belt, unbolt the pulley and remove it. Then unbolt the water pump mounting bolts it is that easy. Please
...water pump 1 bolt left behind power steering pulley is there a trick of the trade or remove pump? you have to remove p/s pump need to put socket in hole on p/s pulley to get to bolts to remove ...
...Remove the water pump pulley. Place a screwdriver behind the pulley to lock it in place while removing the pulley mounting bolts with a ratchet wrench. ?5 Disconnect the coolant hoses running to the ...
...Northstar engine (click image for zoom) Fig. Remove the water pump belt shield Fig. Remove the water pump adjuster pulley retaining bolt and Fig. Remove the water pump retaining bolts Hope
...car to catch the antifreeze. Remove the water pump from the engine, installing new pump in reverse order to removal. removing the alternator also helps big time. 2 bolts on the front and 1 on the ...
...take pulley off of pump loosen clamps on lower hose and bypass hose you may have to loosen accessory bracket but you dont have to take it out then remove water pump cleanup old gasket and ...
Remove drive belt from water pump drive pulley and water pump pulley. Installation Position drive belt onto water pump drive pulley and water pump pulley. Rotate drive belt tensioner clockwise by hand
Question about Oldsmobile Cutlass Supreme
...and remove accessory drive belts and idler assembly bolts loosen the hose clamp and detach the heater hose from the water pump and then remove bolts from water pump they around $36.00 at ...
Question about Oldsmobile Cutlass Supreme
...water pump .then you remove pulley bolts then water pump bolts. then clean gasket surface be careful dont scratch the surfaces up.put in new pump. toque it to 29 ft the long bolts.torque .97 inch ...
Question about Oldsmobile Cutlass Supreme
remove the pulley 5 that's the water pump there are 5 bolts to remove (8mm) 6 after removing the bolts tap the pulley flange to remove the pump 7 clean the old gasket off the front cover 8 install the
672 questions posted
Usually answered in minutes!
697 Questions
571 Questions
387 Questions
236 Questions
203 Questions