1997 Oldsmobile Cutlass Supreme "engine cooling system bleeder valve" Questions

...cooling system you may need to burp the system or rather take the air bubbles out. When the car is overheating does the heater blow hot air out the vents? If not, it needs to be burped. There is a ...

...cooling system. There is a bleeder valve somewhere by the engine next to a radiator hose. If you cant find the bleeder valve, run the engine, open the radiator reservoir (not the radiator cap, it ...

cooling system. If you see any use them to remove trapped air. Start the engine and slowly turn the screw to remove trapped air. If there are no bleeder screws then remove the radiator cap from a cool

cooling system with the reservoir cap off while the engine is running? 2009 Dodge Charger 3.5 V6 SXT automatic Can I bleed the cooling system with the reservoir cap off while the engine is running? Do

...cooling system has no bleeder valve. Removing trapped air (bleeding) from the system is done by loosening the upper radiator hose with the engine running, and letting some coolant to ooze out. If the ...

...cooling system? Hello. To 'bleed' your Buick's coolant system, open the 'bleeder valve' then start engine. Let engine 'warm' to operating temperature. Add coolant/water to reservoir tank if needed as ...

...cooling cap. Look for bleeder valves, - you will have to fill the vehicle with them open. And then Fill and bleed as the engine is running. When the engine is running you will crack the bleeder open ...

...cooling system. To correct this fill radiator with engine still running and what bleeder till there is no more air and just coolant, close bleeder replace radiator cap and problem should be solved if ...

...cooling system. Are these the bleeders? And if so, how am I supposed to compress them? Those valves sound like fuel pressure test ports. Press down the center of valve and see if gas comes out. If it ...

...cooling system. It may not have one. With the engine cold remove the radiator cap. Make sure the radiator is full. Set the heater control to Hot. Start the engine and watch for escaping air bubbles. ...