...Lower Ball Joint Remover and Installer, J 34874 Booster Seal Remover/Installer, J 41435 Ball Joint Installer, J 45105-1 Ball Joint Flaring Adapter and J 45105-2 Receiver. On 4WD vehicles, remove the ...
lower ball joint stud from the steering knuckle. Refer to Lower Ball Joint Replacement (RWD) or Lower Ball Joint Replacement (4WD). Remove the lower control arm from the frame. have fun and be careful
...lower ball joints have been replaced, swaybar links replaced and hub/bearings replaced. I did the sway bar links myself. The drivers side ball joints look like originals because of the way they are ...
ball park figures based on book rate. Using a $55.00 hourly rate, 2.0hrs upper 2.8hrs lower. Parts and labor $264.00 lower $223.03 upper. $487.03 + tax and allignment. Hourly rates differ from shop to
...lower ball joint to steering knuckle and tighten to specifications. 6. Install stabilizer shaft or link to control arm, tighten to specifications. 7. Insert a screwdriver or drift into caliper and ...
...it was the CV joints, but I'm not sure. sound's to me like it might be a lower ball joint and a hub assembly on that side of the vehicle or a lower control arm bushing is
front lower ball joint wear. how much movement can you have I have the same problem few days ago, and still didn't find any solution. Can any one please help?????20
I replaced upper and lower ball joints, but its still jumpy on the road what else do i need to look at?? Check the tie rods and the shock absorbers.
when I made sharp turns then it became consistant while driving straight. I have replaced both CV axles upper and lower ball joints and hub assembly. not sure where to go from here. Sway bar end links
lower A-arm spread from the spindle hub. I can't get enough room to get the ball joint out? Have you tried a long prybar, about 3 foot long one? un bolt the strut holding the wheel bearing assembly. n
352 questions posted
Usually answered in minutes!
509 Questions
528 Questions
423 Questions
341 Questions
141 Questions
