1997 Oldsmobile Aurora "obd bulb check" Questions

Ad

...bulb check at key on and to inform the driver that an emissions fault has occurred. Once the engine is started, if no faults are detected, the control module should extinguish the MIL after a few ...

Ad

Question about Oldsmobile Aurora

1 Answer

...bulb burnt out is my cams shot (no ticking noise ) any help is greatley appreciated is this car obd1 or obd 2 manufacture date of 01/95 Well that car is a obd1. There are many issues that can cause ...

Ad

...bulb may have gone out and check the back of the obd plug to make sure no one pulled the diag wire from the plug assembly. Check for power and ground at the data-port, check all fuses for OBD2 & ...

Question about Oldsmobile Aurora

1 Answer

...bulb failure'. I checked and replaced failed bulbs but now none of the side lights or rear numberplate lights will come on. I have checked the fuses which seem fine. you have an electrical shortage. ...

Question about Cars & Trucks

2 Answers

...obd mil bulb on jeep? What Jeep? What model? What year? Is this that 96 jeep grand Cherokee? I looked at the info for 4.0L. Are you talking about check engine light? A new bulb may not fix it? I'd ...

...light doesn't come on at start up can't pass smog if check engine light doesn't come on,I change bulb and still not coming on Try scanning the PCM connecting at OBD scanner reader

...OBD 1 code 332 and 335 on a 1994 Ford Explorer, both refer to the EGR it was gonna pass,smog, till they check the light bulb to the check engine wasnt working, then i found out that it coded Change ...

...a bulb check. So either the bulb has burned out or the previous owner disconnected it. contact the Honda service dealer but I would doubt that it would have as it is too early for obd-11 dash ...

Question about Oldsmobile Aurora

3 Answers

obd reader) my 05 plate 320d had a broken ground wire in rubber gator to the boot lid plus had corroded bulb sockets with signs of electric arc all cleaned and repaired the ground wire. After checking

...bulb. Solid illumination after the engine is started indicates the On Board Diagnostics System (OBD-II) has detected a malfunction. Refer to OBD-II in the Maintenance and Specifications chapter. If ...

Not finding what you are looking for?
1997 Oldsmobile Aurora Logo

630 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...