1996 Oldsmobile Cutlass Ciera "rotors" Questions

what size socket is needed to remove the nut on the holds the rotor on,or is it a knock off rotor You don't remove the big axle nut Remove the caliper then the rotor

Is there a rotor keeper removal tool? I was told Is there a rotor keeper removal tool? I was told one was needed to remove the rotor keeper on the front brakes of a Cutless Ciera. no, just get a pair ...

my front disc brakes vibrate very bad when braking, also extreme heat on rotor area. rotors do not look warped and caliper piston goes in and out (no signs of leakage) i think the problem is on ...

am not getting spark in my 1991 olds cutlass ciera. what could it be? for a week it would start sometimes, and the next time it won't start again. now it won't start at all. checked a plug ...

When changing the brakes on my car I encountered the following problem... http://www.ehow.com/how_6148325_install-_93-oldsmobile-cutlass-ciera.html The image above shows my caliper. Around the top and

1991 oldsmobile cutlass ciera i was driving my car going on to the express way as my car stalled i pulled off the side of the road and tried to start it back up it would not start it would turn over ...

no fire to the coils. censors maybe? Check the distributor cap and rotor first. Corrosion is the ignition system's worst enemy.

replace front wheel bearing. How? 95 Oldsmobile Cutlass ciera remove front tire ,brake caliper ,rotor and axle nut its gona be a hub bearing it has 3 bolts holding it

wont get fire to spark plug Bad ignition module or it's the coil packs/distributor cap and rotor. If this was at all helpful, please rate. Thanks for asking.

no spark on 1 cylinder? YOU MUST HAVE A BAD WIRE CHECK CAP AND ROTOR FOR BUILD UP ON INSIDE