1995 Oldsmobile Aurora "replace crank sensor" Questions

...crank case position senor for 2002 Olds Aurora 4.0 engine? Eng check lite on for that reason. 2) Losing oil only when engine running. Can smell in passenger compartment when driving. No leaks on ...

...replace. After replacement, a "crank position variance re-learn" procedure will need to be done to relearn the new sensors. This will need to be done with a dealership scanner, or a higher end ...

...it is after I have driven it and recrank it. The distributors on these GM trucks should be replaced at least once a year. Any check engine light on? The crank sensor can cause it to backfire as

sensor (which we were told would fix it) with no luck. It ran just fine when we test drove it and then boom... nothing. Battery has been replaced. Any ideas would be greatly appreciated! you were sold

Crank-Shaft Position sensor is bad. If you are not noticing any problems driving (engine dying for a second or stalling) you could reset the code and see if it appears again. This is a dual sensor, so

...then cuts off the car almost every time cuts off when going in reverse i was told something about main computer (pcm) or crank potion sensor can anyone give me any ideas replace the main ...

tachometer goes to 8000 rpm even though engine is not rev'ing that fast Mine did this. It was the Crank Position Sensor. The replacement did not need to 'relearn'.

...tach jumps to 8000rpm after car hesitates. Also, car will stall at stop light intermittently with no indication. No service codes are stored by computer. replace the Crank Shaft Position

what is a po 300 misfire on a 2001 aurora? Welcome to FIxYa.com Replace the crank sensor. please read the freeze frame data that stored the DTC. Regards, Lee Davidian Thank you for using FixYa,com.

...cranking when first started Most common reason for this is the crank sensor needs to be replaced-there are 2 on the 4.0 the second one is a backup, but the main one is not difficult to