1995 Oldsmobile Aurora "cost replace output speed sensor" Questions

...cost you a minimum of 1000 dollars to have a mechanic fix as the transmission needs to be removed hope this is what you needed Their are two different speed sensors on that car . One is INPUT SPEED ...

...cost of sensor? Outut speed sensor fault code shown. Priced new output speed sensor ?190, went to breakers yard, found similar sensor on mitsubsihi carisma, purchased ?20, fitted same no problems ...

...replace it? What is cost of new output speed sensor? Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, ...

...replace the speed sensor for less that what it would cost to diagnose it.On the other hand, you must have the required scan tool to access the TCM to clear the code.  Please note that a generic ...

...but first drain the fluid then you will have a internal or input sensor then a output sensor [speed] if you are not familiar you could cost major cost of repairs hope this helps and Good Luck Mike ...

...replace my oxygen sensors low bank 1 and 2 they cost 99 and 117. Hope this help I was upset I spent 124.99 on the output speed sensor and it wasn't the problem. Hope this help sensors on Nissan is a ...

...in the tranfer case, just look for a white shape like box with wires plugged into it and you need a socket to remove it, iam not sure how much it is to replace as the cost varies at different

...output sensor :) start there, There are 2 side by side, one is an input, one is an output, Replace them both the cost around 45.00 for the pair, and fairly easy to do, located on front of trans ...

replace the speed control sensors and i am finding out thaat i can not just go and buy them the dealer has to install them." is bull S__t! You can purchase any part you like for your vehicle. First of

...replace the turbine sensor (assuming that the output sensor is OK, see below) and if that doesn't change things it pretty much dictates a need for rebuild. My suspicion is that the low/reverse clutch ...