1994 Oldsmobile Cutlass Supreme "brakes olds rear" Questions

...brakes keep locking on 1997 olds cutlass supreme, while driving! car still moves, but rear brakes began to smoke It's most likely corrosion in the emergency brake cable causing the brakes to not ...

...brakes, no fluid will come out, have tried using vaccum pump to bleed to no avail, have bled master cylinder, top two lines will bleed, bottom two lines will not bleed. got any ideas? Its possible it ...

...Olds Cutlass Supreme where the rear brake lights do not work. The bulbs are fine, and the high brake light does work. The turn lights (which use the same bulbs as the brake lights) do work. Where ...

...olds cutlass supreme. None of the brake lights work. All other lights work. Fuses are good. You probably have a bad brake light switch. This switch is located on the brake pedal arm or a bracket next ...

olds cutlass supreme, both rear brake lights dont work simultaneously, then sometimes they do, checked fuses but they are ok, bulbs are still good, what could be wrong? Check switch at brake pedal and

olds aurora back brake pad replacement, how to compress the pads to get the caliper back over the pads? Special tool is a 1" cube with tabs on each side that fits into indentations on the brake piston

...brakes after that pumped them up, now maybe 1 month later lent same car to friend ,said brake pedal sank to floor & red brake light came on , whats wrong? 94 olds cutlass supreme s/L 3.1 seems ...

...brakes.. 1994 olds cutlas supreme.. it has had abs lite on & the car has set for a year & 1/2. I get break fluid out of the abs rear bleeder & the abs front bleeder. but cant get any to ...

rear brake cylender replacement rear brake cylender leaking i replaced it but when i tried to bleed i cannot get any fluid out of either rear cylender would power bleeding fix the problem have you ...

olds cutlass supreme sl with 3.1 6 cyl. ABS and Brake light stays on. Brake pedal is hard to push but front brakes work. Back brakes don't work at all. Took the brake lines off at the rear caliper and