...key in the ignition it wont turn over at all, like it is locked. i tried to turn the whell while trying to turn the key and it still wouldnt unlock. is there anything elese that will help unlock the ...
key in the ignition but the key/ignition doesn't wanna turn it could be the steering wheel is locked turn the streering wheel from left to right as far as the lock will let you and try turning the key
...key to see if it helps any. Make sure the steering wheel is not hard locked while turning the ignition. Try gently moving the steering wheel while trying to turn the ignition. Sometimes a spray of ...
...ignition key.Your keys must be badly worn and or resistor(antitheft)could be weak.Good locksmith can make you a new replacement at reasonable price.Also make sure you wipe ignition key if it gets ...
Question about Oldsmobile Cutlass Supreme
ignition key and everything blacks out my vehicle operates as though everything is ok but then, without warning, i turn the ignition key and the whole car blacks out; this occurred once before about a
Question about Oldsmobile Cutlass Supreme
...in switch and turned ba kwadd Turned key backwards once and got radio and everything. Would it be a bad ignition switch going to ground when key turned You have a short in ignition, better to ...
...key. Use penetrating oil before drilling to get the key ready to glide out-if you try that. Good luck Call your local locksmith. they will come and change the ignition switch and give you a new
...the build sheet and, of course, the boxes for the "key codes" are empty. Locksmith says it'll cost $400 to make new keys...there must be another option. You can replace the ignition
key ignition switch how do I replace the key ignition switch in the colum Remove collumn cover then turn ign to aux position,then insert 2mm allen wrech in small hole in housing and push down,cylinder
Question about Oldsmobile Cutlass Supreme
...keys on their key chain that can cause interference with the receiver in your steering column. Try using the one ignition key to start. Try getting a new key cut - resistor in the key(s) may be
528 questions posted
Usually answered in minutes!
697 Questions
571 Questions
488 Questions
236 Questions
203 Questions